Extrudr
DuraPro ABS has good mechanical resistance and is therefore very widely used in industry. It is also characterized by a high degree of flexibility and good layer adhesion. At the same time, it is very resilient and has above-average impact strength. The flow properties, which have been specially optimized for the FDM process, result in a visible reduction in the number of layers. In addition, the layers can be smoothed with acetone so that the surface visually resembles that of an injection molded part.
MaterialtypThe base polymer type determines printability, strength, flexibility, and heat resistance
ABS
DrucktemperaturRecommended nozzle temperature range. Stay within range for best layer adhesion and surface quality
240°C - 260°C
* Affiliate-Link: Bei einem Kauf über diesen Link erhalten wir eine Provision – für dich entstehen keine Mehrkosten. Mehr erfahren
* Preise inkl. MwSt., zzgl. Versandkosten. Bei einem Kauf über diese Links erhalten wir eine Provision – für dich entstehen keine Mehrkosten. Letzte Aktualisierung vor kurzem.
Preise können sich ändern. Historische Daten dienen nur zur Orientierung.
Noch keine Bewertungen
ABSExtrudr
ABSForward Am
ABSPolymaker
ABSeSUN
BetttemperaturHeated bed temperature to prevent warping. Some materials like PLA can print without a heated bed
100°C - 110°C
Durchmesser1.75mm is standard, 2.85mm for some printers
1.75 mm
SpulengewichtNet weight of filament on the spool. Standard spools are 1kg (1000g)
750g
DichteMaterial density affects part weight. Higher density = heavier prints for the same volume
1.04 g/cm³
