Extrudr
PETG has a very high mechanical load capacity as well as flexibility with good stiffness at the same time. The layer adhesion of the material is excellent with sufficient heat and low cooling. PETG is suitable for slightly advanced users, as a heating bed and enclosed build space is recommended, especially for large components (over 10x10x10 cm). The material has a glassy appearance and is available in intense colors.
MaterialtypThe base polymer type determines printability, strength, flexibility, and heat resistance
PETG
DrucktemperaturRecommended nozzle temperature range. Stay within range for best layer adhesion and surface quality
10°C - 10°C
* Affiliate-Link: Bei einem Kauf über diesen Link erhalten wir eine Provision – für dich entstehen keine Mehrkosten. Mehr erfahren
* Preise inkl. MwSt., zzgl. Versandkosten. Bei einem Kauf über diese Links erhalten wir eine Provision – für dich entstehen keine Mehrkosten. Letzte Aktualisierung vor kurzem.
Keine Preisdaten verfügbar
Noch keine Bewertungen
PETGBambu Lab
PETGRaise3D
PETGBambu Lab
PETGeSUN
BetttemperaturHeated bed temperature to prevent warping. Some materials like PLA can print without a heated bed
70°C - 80°C
Durchmesser1.75mm is standard, 2.85mm for some printers
1.75 mm
SpulengewichtNet weight of filament on the spool. Standard spools are 1kg (1000g)
10g
DichteMaterial density affects part weight. Higher density = heavier prints for the same volume
1.27 g/cm³
