MaterialtypThe base polymer type determines printability, strength, flexibility, and heat resistance

OTHER

DrucktemperaturRecommended nozzle temperature range. Stay within range for best layer adhesion and surface quality

210°C - 230°C

BetttemperaturHeated bed temperature to prevent warping. Some materials like PLA can print without a heated bed

50°C - 60°C

Durchmesser1.75mm is standard, 2.85mm for some printers

1.75 mm

SpulengewichtNet weight of filament on the spool. Standard spools are 1kg (1000g)

1000g

DichteMaterial density affects part weight. Higher density = heavier prints for the same volume

1.2 g/cm³

Rear plate

Bewertungen