Bambu Lab ABS Refill Red 1.75 mm 1.000 g

To reduce plastic waste, Bambu Lab recommends printing with the reusable spool and the refill filament. All print parameters are embedded in the RFID tag, which can be read via the AMS (Automatic Material System). Load and print! No more tedious settings. Pre-print drying settings: 80 °C, 8 hours. Print and maintain humidity in the enclosure < 20% RH (sealed, with desiccant). Nozzle temperature: 240–270 °C. Bed temperature (with PVP adhesive): 80–100 °C Print speed < 300 mm/s