ABSBambu Lab
Compare with other ABS filaments
Find the best filament for your project
* Affiliate link: We may earn a commission if you purchase through this link – at no extra cost to you. Learn more
* Prices include VAT, plus shipping. We may earn a commission if you purchase through these links – at no extra cost to you. Last updated recently.
Prices may change. Historical data is for reference only.
No reviews yet
To reduce plastic waste, Bambu Lab recommends printing with the reusable spool and the refill filament. All print parameters are embedded in the RFID tag, which can be read via the AMS (Automatic Material System). Load and print! No more tedious settings. Pre-print drying settings: 80 °C, 8 hours. Print and maintain humidity in the enclosure < 20% RH (sealed, with desiccant). Nozzle temperature: 240–270 °C. Bed temperature (with PVP adhesive): 80–100 °C Print speed < 300 mm/s
Material TypeThe base polymer type determines printability, strength, flexibility, and heat resistance
ABS
Print TemperatureRecommended nozzle temperature range. Stay within range for best layer adhesion and surface quality
240°C - 270°C
Diameter1.75mm is standard, 2.85mm for some printers
1.75 mm
Spool WeightNet weight of filament on the spool. Standard spools are 1kg (1000g)
1g