Polymaker PolyLite PETG Translucent Blue 1.75 mm 1.000 g

PolyLite™ PETG is an affordable PETG filament with balanced mechanical properties and easy printability. If we had a simple axis ranging from "low durability but easy to print" on the left to "high durability but difficult to print" on the right,PLA would be on the far left, ABS on the far right, and PETG right in the middle.Printing temperature: (PLA+ABS)/2Heat resistance: (PLA+ABS)/2Strength: (PLA+ABS)/2For more technical information, please refer to our TDS table below. Settings for printing and drying? Print temperature: 230°C - 240°CBed temperature: 70°C - 80°CPrint speed: 30mm/s - 50mm/sFan: 20% Retraction distance: 1 mmRetraction speed: 20 mm/sIndirect drive:Retraction distance: 3 mmRetraction speed: 40 mm/s Curing settings: 65°C for 6 hours(only if the material has absorbed moisture)Do I need to use the cooling fan with PETG? Yes, if you want a nice surface finish.No, if you’re looking for strong and durable parts.20% ON, if you want the best of both worlds.