Flashforge
Flashforge PLA filament is produced using corn starch, totally environmentally friendly. No irritating odor caused during the 3D printing process. Fluent 3D printing greatly depends on the quality of filament. Flashforge uses ultra-pure corn starch to produce PLA filament. To guarantee its final quality and performance strict quality control standards during the PLA manufacturing process are carried out. The diameter tolerance lies within 0.02mm.
Tipo di materialeThe base polymer type determines printability, strength, flexibility, and heat resistance
PLA
Temperatura di stampaRecommended nozzle temperature range. Stay within range for best layer adhesion and surface quality
190°C - 220°C
affiliate.disclosure affiliate.learnMore
* Prezzi IVA inclusa, più spedizione. Ultimo aggiornamento recente. Link affiliati.
Nessun dato sui prezzi disponibile
Nessuna recensione ancora
PLAPolymaker
PLAPolymaker
PLAPolymaker
PLAPolymaker
Temperatura del pianoHeated bed temperature to prevent warping. Some materials like PLA can print without a heated bed
50°C - 60°C
Diametro1.75mm is standard, 2.85mm for some printers
1.75 mm
Peso della bobinaNet weight of filament on the spool. Standard spools are 1kg (1000g)
500g
DensitàMaterial density affects part weight. Higher density = heavier prints for the same volume
1.24 g/cm³
