Tillbaka till katalogen
ABS
ABSeSUN
ABSeSUN
The eSun ABS+ filament is suitable for printing sturdy and durable parts, as it has a higher melting point and is less brittle. It also exhibits low shrinkage and does not warp or crack easily during printing.
MaterialtypThe base polymer type determines printability, strength, flexibility, and heat resistance
ABS
UtskriftstemperaturRecommended nozzle temperature range. Stay within range for best layer adhesion and surface quality
220°C - 250°C
BäddtemperaturHeated bed temperature to prevent warping. Some materials like PLA can print without a heated bed
80°C - 100°C
Diameter1.75mm is standard, 2.85mm for some printers
1.75 mm
SpolviktNet weight of filament on the spool. Standard spools are 1kg (1000g)
1g
DensitetMaterial density affects part weight. Higher density = heavier prints for the same volume
1.04 g/cm³
affiliate.disclosure affiliate.learnMore
* Priserna inkluderar moms, plus frakt. Senast uppdaterat nyligen. Affiliatelänkar.
Priserna kan ändras. Historisk data är enbart för referens.
Inga recensioner ännu
ABSExtrudr
ABSForward Am
ABSPolymaker
ABSeSUN