NYLONPrusa
Compare with other NYLON filaments
Find the best filament for your project
affiliate.disclosure affiliate.learnMore
* Priserna inkluderar moms, plus frakt. Senast uppdaterat nyligen. Affiliatelänkar.
Priserna kan ändras. Historisk data är enbart för referens.
Inga recensioner ännu
The Fiberthree F3 PA Pure Pro is a premium Nylon filament (Polyamide) engineered for industrial demands and challenging 3D printing projects. This material excels in mechanical strength, toughness, and outstanding wear resistance. Compared to standard PLA or ABS, PA Pure Pro offers significantly better heat resistance and impact strength, making it ideal for functional prototypes and durable parts. For optimal results, a nozzle temperature between 260°C and 290°C along with a heated bed at 80–100°C is recommended. Due to Nylon's tendency to absorb moisture, drying the filament before printing (approx. 4–8 hours at 70–80°C) is essential to prevent print defects. Applications range from gears and bearings to robust enclosures in the automotive and mechanical engineering sectors. Key strengths include high chemical resistance and low friction, while requirements for an enclosed build chamber and the necessity of pre-drying should be considered as limitations.
MaterialtypThe base polymer type determines printability, strength, flexibility, and heat resistance
NYLON
UtskriftstemperaturRecommended nozzle temperature range. Stay within range for best layer adhesion and surface quality
260°C - 290°C
BäddtemperaturHeated bed temperature to prevent warping. Some materials like PLA can print without a heated bed
80°C - 100°C
Diameter1.75mm is standard, 2.85mm for some printers
1.75 mm
SpolviktNet weight of filament on the spool. Standard spools are 1kg (1000g)
500g
DensitetMaterial density affects part weight. Higher density = heavier prints for the same volume
1.15 g/cm³
