SUNLU

E ABS(Easy ABS) 1KG(p.s.: For New Refill Spool is 0.9kg) - Black

What is SUNLU Easy ABS? We adjusted the ratio between the three (Acrylonitrile, Butadiene, Styrene) and added a little SUNLU wisdom into the mix. While the hardness and acid and alkali resistance remain the same, SUNLU have slightly reduced its heat resistance. The result is a minimum printing temperature of 225℃ and a minimum heating of 70℃ for the base plate. But E-ABS still maintains the low stress it should have: no cracking, no warping! Description: 1. Printing does not need a holding tank, open printer can be used! 2. Low shrinkage, print models do not warp or crack! (Note: Printing the bottom 10 square centimeters above the model can raise the temperature of the base plate to 80 ~ 90 degrees.) 3. Very low odor when printing 4. Filament do not need to dry, very little impact by humidity 5. balanced physical properties, high strength, good toughness Parameter: Material: SUNLU E-ABS(Easy-ABS) Wire diameter: 1.75/3.0MM Tolerance: 0.02MM Printing temperature: 225-235℃ Base plate temperature: 60-70℃ Melt index: 98g/10`min 220¡æ/10kg(g/10min) Elongation at break£º20% Melting point ¡æ: 130 Heat distortion temperature ¡æ: 57.9 Density g/cm3: 1.04 Printing speed: 40-60mm/s Bubble: 100% zero bubble Net weight: 1 KG/roll Gross weight: 1.3 KG/roll Length: 1.75MM(1KG)=395M 3.0MM(1KG)=130M